10 www.apem.com q-series 14mm? panel mounting led indicator product specification intensity (typical) at |op standard prominent flush forward voltage (all voltages) (all voltages) he red 80mcd 10mcd 2.0v green 40mcd 5mcd 2.2v yellow 30mcd 4mcd 2.1v blue 280mcd 10mcd 3.2v white 350mcd 20mcd 3.2v bi-colour (typical) (red/green) 80/50mcd 14/10mcd 2.0v/2.2v tri-colour (typical) (red/green/yellow) 80/50/50mcd 14/10/10mcd 2.0v/2.2v/2.1v bi-colour - the colour is changed by reversing the polarity of the supply voltage. tri-colour - the indicator has red and green leds, when both connected yellow is produced. super bright prominent flush forward voltage (all voltages) (all voltages) he red 7,500mcd 2000mcd 2.2v green 4,100mcd 250mcd 3.5v yellow 2,500mcd 350mcd 2.3v blue 1,300mcd 300mcd 3.7v white 1,900mcd 200mcd 3.7v luminous intensity will be reduced with lower operating current. max reverse voltage: 5v viewing angle: 100 (dependant on model) life expectancy: 100,000 hours operating temperature range: C40 to + 85c note: the operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. the company reserves the right to change specifications without notice. distinctive features and specifications ? 14mm panel mounting led indicator ? 10mm coloured diffused epoxy lens or 10mm water clear super bright leds ? bright chrome, black chrome or satin grey bezel finish ? prominent and flush bezel styles ? 2vdc C 220vac ? (2.8 x 0.8) terminals, pins or (200mm long) wire terminations ? ip67 sealing option (en60529) ? supplied with fixing nut and spring washer nb: ul recognised component switch voltage operating voltage vop operating current |op (min to max) (typical all types) 2vdc (no resistor) 1.8 to 2.5vdc 20ma 12vdc 10.8 to 13.2vdc 20ma 24vdc 21.6 to 26.4vdc 20ma 28vdc 25.2 to 30.8vdc 20ma 110vac 99 to 121vac 6ma 230vac 207 to 253vac 3ma p anel cut out ? 14,00 0,1 technical s pecifications
11 www.apem.com q-series 14mm? panel mounting led indicator technical drawings prominent bezel note: the company reserves the right to change specifications without notice. flush bezel custom engraving custom engraving available on flush bezel versions, contact apem for further details. short body pins short body pins wires wires pins pins solder lug/fastons solder lug/fastons short body wires short body wires 10 10 10 10
12 www.apem.com q-series 14mm? panel mounting led indicator order overview standard options q 14 p 1 c xx b 28 e ? gold faston terminal denotes anode (+), silver terminal denotes cathode (-) ? standard wire length is 200mm, 22awg, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths consult apem ? for leds with alternate voltages consult apem ? bicolour leds, by connecting the gold faston (+) one colour is produced, by reversing the supply voltage another colour is produced C bi-colours are available up to 28vdc ? take care when soldering to the faston terminals ? short body pins and wires are only available up to 28vdc ? the tri-colour led has red and green leds when both are connected yellow is produced ? standard tri-colour faston terminals are two anodes (+) and one cathode (-) ? tri-colour wires are one red (+) and one green (+) anode and one black (-) cathode ? tri-colour pins are centre (C) cathode, shortest (+) anode pin green, longest (+) anode pin red ? maximum panel thickness 11mm ? for behind panel epoxy sealed options please consult apem ? we recommend using superbright leds for use at 220vac ? for resistorless versions (02) please pay attention to the forward voltage ? for multi-voltage options please consult apem q example q14p1cxxb28e ?14mm, prominent bezel, solder lug terminals, bright chrome finish, fixed light, blue, 28volt dc led, ip67 panel seal 1 = solder lug/ fastons (2.8 x 0.8) 2 = pins 3 = wires 6 = short body pins 7 = short body wires c = bright chrome b = black chrome g = satin grey r = red g = green y = yellow b = blue w = white sr = super bright red sg = super bright green sy = super bright yellow sb = super bright blue sw = super bright white rg = red/green ry = red/yellow gy = green/yellow ryg = red/yellow/green 02 = 2vdc 06 = 6vdc 12 = 12vdc 12a = 12vac/dc 24 = 24vdc 24a = 24vac/dc 28 = 28vdc 28a = 28vac/dc 110 = 110vac 220 = 220vac (blank) = unsealed e = ip67 xx = fixed light kk = flashing light (only up to 28vdc) yy = bi-colour zz = tri-colour series mounting hole 14 = ?14mm p = prominent f = flush bezel style terminals bezel finish type of illumination led colour voltage sealing the q14 series is available with a range of standard options, to specify your led, simply choose one option from each column. an example is shown below.
|
